Quick Details
- CAS No.: PU foam sealant
- Other Names: PU foam sealant
- MF: PU foam sealant
- EINECS No.: PU foam sealant
- Place of Origin: Shanghai, China (Mainland)
- Classification: Other Adhesives
- Main Raw Material: Polyurethane
- Usage: Construction, Woodworking
- Brand Name: Gorvia
- Model Number: GF-Series Item-E
- Color: Light Yellow
- Track free: 8-10mins
- Cut through: 30mins
- Density(kg/m3): 17-22
- Close cells rate(%): 35-40
- Adhessive strength(kpa): > 120
- Processing temperature: 5°C to 35 °C
- Fire rating: F/B3 (EN 13 501/DIN 4102-1)
- Shelf life: 12 Months
Packaging & Delivery
Packaging Details | 750ml: 12pcs/ctn 1200ctns /14400pcs /20'GP
carton size: 27.5*21*34.5cm 500ml: 12pcs/ctn 1600ctns/19600pcs/20'GP carton size: 27.5*21*26cm 300ml: 12pcs/ctn 2000ctns/24000pcs/20'GP carton size: 27.5*21*21cm |
---|---|
Delivery Time | 15-25 days after receiving payment |

PRODUCT FEATURES
Gorvia GF-Series Item-E
Tag: All season use, Ecnomic, Good size stability, Shelf Life:12 months
Economic Expanding Polyurethane Foam Description:
GF-Series Item-E 750ML PU foam, which is based on moisture curing polyurethane, containing safety
propellant, is used to seal gaps and crevices with the post-expansion is quite low to prevent deformation.
The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure.
TECHNICAL DATA SHEET
ITEM NO: | EG/ES900G |
Foam color Track free Cut through Density(kg/m3) Close cells rate(%) Adhessive strength(kpa) Tensile strenght (kpa) Compressive strength (kap) Dimension stability (23°C)
Thermal conductivity (mw/m.k) Water absorption(up to 24h) Processing temperature Cured foam temperature endurance Fire rating CFC&HCFCs emission shelf life | Light yellow 8-10mins 30mins 17~22 35~40 > 120 > 30% > 150 0~1.0%(foam direction) 0~1.8%(falt direction) < 34 ≤1.5% 5°C to 35 °C -40 °C to + 110°C F/B3 (EN 13 501/DIN 4102-1) Free 18 months |
PRODUCT IMAGE SHOW
FCTORY WITH 12 PRODUCTION LINES
Guid for using:
1. Shake can well to make the foam ready for use.
2. Clean the substrate and spray some water on it..
3. Screw foam dispenser on tightly and turn the can upside down.
4. Vertical fill the gaps from the bottom upwards.
5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time.
6. Remove unwanted cured foam by cutting it with knife. Well done!
Kindly Reminder:
For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use
.